Re: primary supports

• To: tesla-at-pupman-dot-com
• Subject: Re: primary supports
• From: "Alex Crow" <user-at-alexcrow.clara-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sun, 05 Mar 2000 14:28:07 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Tesla List wrote:

> Original Poster: Fucian-at-aol-dot-com
>
> ok can some one explain how to build a flat spiral?

If you search the archives, you will find plenty of different methods.
You need to start by procuring some thinwall soft copper tubing (eg.
refrigeration). Then you need to drill and cut supports (Lexan, Acrylic,
even wood in a dry area).

Also look on the Tesla Coil webring. Plenty of other coilers on there
with good examples. All the information you require is out there on the
web, you just have to look for it. If you have problems with your setup
or more specific questions, the list is the *very* best place for
them... Oh, *READ* the safety sheet on www.pupman-dot-com. It may save your
life! See recent threads about Tesla coil stunts, safety and death.

regards,

Alex Crow

• Prev: MMC Success!
• Next: Re: NST's ARE ALL DEADLY !!!!!!!!
• Index(es):
  • Main
  • Thread