[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: High Voltage DC Snubber Caps
In a message dated 7/24/00 8:18:27 PM Central Daylight Time, tesla-at-pupman-dot-com
writes:
<< Since I have not purchased any of these caps I would purchase 1 to make
sure they are what Hosfelt has them advertised as. I was told that these
would be good for mmc applications.
Regards Jeff KD4LYH
Hi Jeff,
I bot 100 of the GE snubbers a while back from Hosfelt. I bot the 0.33 uF -at-
2kV.
I use them in a MMC with excellent results. They are polyprops which have
good characteristics. Put a bleeder resistor across each cap.
Cheers,
Ralph Zekelman