[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Primary/Secondary Size relationship
In a message dated 7/14/00 7:14:52 AM Pacific Daylight Time, tesla-at-pupman-dot-com
writes:
> Original poster: Irrelative-at-aol-dot-com
>
> When creating the primary of a tesla coil, does the secondary have to fit
> inside the primary or can it "hover" above it. For example, if you have a
4"
>
> PVC, but the inside diameter of your primary is 3", can you still use them
> so
> long as the secondary is high enough away to prevent sparks from jumping?
> Ok, so maybe this question is seeming less hypothetical as you read it,
but
> I
> just want to see if I need to get a larger primary or not. Thanks to all
> the
> experts who keep us informed!
Yes, you can build the coil that way and it will work fine. I've done
it that way in some cases.
cheers,
John Freau