Re: SRSG motor power

["Gomez ADDams" <gomez-at-netherworld-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

on that fateful day 7/29/00 12:04 PM, Tesla list uttered:

> Original poster: "Barton B. Anderson" <tesla123-at-pacbell-dot-net>

> I'm just talking about a built-in method to adjust the firing point along
> the AC half cycles when using a sync gap. This of course can be done at the
> disk-to-motor shaft placement, but this is trial and error. Some of the
> coilers who have built cradles simply move the motor itself in the cradle
> to make this adjustment - and some do it while the system is running.

Oh!  The motor comes with a resilient-mount cradle (I wasn't sure whether a
"crattle" was a real object).  I'll probably make the initial phase angle
adjustment with the thing running at low power, and then lock it down.

Since the thing will be salient pole, I shouldn't need to adjust it again.

- Gomez (Bill Lemieux)

........................................................................
Fight for your right to privacy & freedom on the internet!  Use strong
encryption.  Encourage others to do the same.  Strong encryption is your
key to electronic privacy.  I have PGP-fone available for secure voice.
PGP fingerprint: 1CC2 ACFA 166B 92C7 FC4E  D0F5 006A 0EC1 8BD3 A988