Re: shopping :) and a little tinkering

• To: tesla-at-pupman-dot-com
• Subject: Re: shopping :) and a little tinkering
• From: "Christopher Boden" <chrisboden-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 24 Feb 2000 08:13:20 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

>Original Poster: Parpp807-at-aol-dot-com
>
>In a message dated 2/22/00 6:18:46 PM Central Standard Time, 
>tesla-at-pupman-dot-com
>writes:
>
><<  .25" Cu spaced -at- .25" Primary (we added 20' for another 3
>  turns) ANYONE KNOW A GOOD WAY TO SPLICE THINWALL TUBEING FOR THIS  >
>
>3/16 Cu telescopes nicely into 1/4-inch.
>1/4-inch telescopes into 3/8.
>
>You can drill and tap it for set screws or you can sweat solder the whole
>joint. this works very well.
>
>Cheers,
>Ralph Zekelman
>
>

Thank's Ralph! It worked great, a real pain to solder with a 30W Iron :) 
(it's all we had) but it works!

Chris "Coronaphile" Boden
the Geek Group
www.geekgroup-dot-org


______________________________________________________
Get Your Private, Free Email at http://www.hotmail-dot-com

• Prev: Re: Liquid Capacitor
• Next: Re: big "variacs" for sale cheap
• Index(es):
  • Main
  • Thread