Re: THOR PROJECT STATUS UPDATE

• To: tesla-at-pupman-dot-com
• Subject: Re: THOR PROJECT STATUS UPDATE
• From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 23 Feb 2000 06:47:40 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi Marco,

> Original Poster: "Marco Denicolai" <Marco.Denicolai-at-tellabs.fi> 
> 
> Hello everybody.
> 
<snip>
> After mounting six of them in the power supply rack and making new cables, we
> tested again today the supply connected to my old TC: voltage was set to
10 kV
> and repetition rate to about 300 Hz.
> 
> I got a single fat streamer going from the toroid to a grounded point
over 50"
> far: my TC has never reached that far before!

What was the primary cap value?  Was the gap firing voltage 
accurately metered?

Regards,
Malcolm

P.S. - sorry to hear about your transformer failure.

• Prev: Sync Rotary gap motor
• Next: Grounds.............
• Index(es):
  • Main
  • Thread