Re: schematics... (here's mine...)

• To: tesla-at-pupman-dot-com
• Subject: Re: schematics... (here's mine...)
• From: "Adam" <adamsmith-at-mediaone-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 21 Feb 2000 07:38:29 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

> Original Poster: "Barton B. Anderson" <tesla123-at-pacbell-dot-net>
> 
>> Original Poster: "Christopher Boden" <chrisboden-at-hotmail-dot-com>
>> 
> 
> Hi Chris,
> 
<snip>
> I'll let the other NST croud throw you a schematic. I run a pole pig.
Although
> the schematics are identical as far as proper connections, they may be
able to
> add a few details for an NST that I could not.
> 
> Good luck,
> Bart

Here is my schematic:

    http://people.ne.mediaone-dot-net/adamsmith/tesla/tesla_schematic.jpg

It's exactly what I'm building, except that where there are 6k resistors
shown, it should read 3k.  Each leg actually has two 6k in parallel for more
power handling, so it is really 3k ohms per leg.

In this schematic, several of the components are in fact multiple units.
The single NST shown represents a pair of NSTs in parallel, the 300uF P.F.C.
capacitor is made up of 6 motor-start capacitors in parallel that add up to
this, the 40 amp corcom filter shown is two 20A in parallel, and the 0.03uF
80kV Maxwell cap is two 0.06uF 40kV caps in series.

-Adam
adamsmith-at-mediaone-dot-net

• Prev: Re: FIRST LIGHT!!!!!!!!!!!!!!! .......I have waited SOOO long tosay that :)
• Next: Re: weather influence on TC performance
• Index(es):
  • Main
  • Thread