[Prev][Next][Index][Thread]

DC coil



Hello,

I am working on my second TC and I was planning on going DC.
The specs so far are a 2kv 500mA MOT rectified with four 
6000volt half amp rectifier diodes, a .66uf capacitor made 
with 2 .33uf 2kv dc metallized polypropelyne caps, a 
secondary wound on schedule 30 4" PVC with 24 AWG magnet 
wire for 21", and probably about 2 turns of 1/4" soft copper 
tubing for the primary. The only problem is that I don't 
know what the best way is to configure the tank circuit for 
DC. Any help would be greatly appreciated as I'm ready to 
begin major construction anytime soon (as soon as schoolwork 
and other time-constraints allow :-).

Jason Johnson


______________________________________________________
Get your free web-based email at http://www.xoom-dot-com
Birthday? Anniversary? Send FREE animated greeting
cards for any occasion at http://greetings.xoom-dot-com