Re: FIRST LIGHT!!!!!!!!!!!!!!! .......I have waited SOOO long to say that :)

• To: tesla-at-pupman-dot-com
• Subject: Re: FIRST LIGHT!!!!!!!!!!!!!!! .......I have waited SOOO long to say that :)
• From: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sun, 20 Feb 2000 13:03:59 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

to: Chris

Throw a 60 mA xmfr on it and the output will instantly increases (xmfr
provides more current to charge cap faster).

Regards,

Dr. Resonance


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Saturday, February 19, 2000 9:06 PM
Subject: FIRST LIGHT!!!!!!!!!!!!!!! .......I have waited SOOO long to say
that :)


>Original Poster: "Christopher Boden" <chrisboden-at-hotmail-dot-com>
>
>First Light :)
>
>6-8" thin icky blue discharges to a grounded rod.....but it counts!
>
>Alright, here's the system.
>
>15/30 NST
>6X24"sec with turn 1 at 2" above pri.
>.005 .007 SW caps (we can use any combination)
>
>and either a 14X4" or a 30X3" toroid
>
>1.4" tube at 1/4" spaceing, inner turn 10.5" on the primary
>
>single static, non blown gap (temporary)
>
>
>What can we do to make this better? 8" is great, but not exactly what we're
>looking for here (5' would be nice) :)
>
>ideas?
>
>Chris and the Geeks
>
>www.geekgroup-dot-org
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail-dot-com
>
>

• Prev: Re: Brass or steel spheres (Oudin terminal)
• Next: Re: Pole Pig Question
• Index(es):
  • Main
  • Thread