Re: Brass or steel spheres (Oudin terminal)

• To: tesla-at-pupman-dot-com
• Subject: Re: Brass or steel spheres (Oudin terminal)
• From: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sun, 20 Feb 2000 13:03:41 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

to: Peter

I stock them in the 1 inch size.  We can also get 1 1/4 and 1 1/2 inch
sizes, but we have to buy in quantities of 24 pcs or more so we usually just
stock the 1 inch size.

Regards,

Dr. Resonance


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Saturday, February 19, 2000 7:08 PM
Subject: Brass or steel spheres (Oudin terminal)


>Original Poster: "peterB" <zardoz-at-albany-dot-net>
>
>Hi,
>I have a perticular application that needs solid (or hollow) brass or
>machineable
>steel balls for a terminal on a small coil.
>The small float balls will not work. The maximum diameter is 1 1/4"
(actually,
>that is the exact size I need.)
>
>I have tried McMaster Carr, but they only have smaller sizes available.
>They have the correct size in bronze, if this would work. I do not know
>the electrical properties of bronze, would it be a good conductor, and
serve
>as the terminal on a small Oudin resonator?
>
>Any other sources of odd/hard to find materials similar to McMaster that I
>could
>
>contact?
>
>Thanks,
>
>-Pete
>
>
>

• Prev: Re: Brass or steel spheres (Oudin terminal)
• Next: Re: FIRST LIGHT!!!!!!!!!!!!!!! .......I have waited SOOO long to say that :)
• Index(es):
  • Main
  • Thread