Re: Homemade Trasformer

• To: tesla-at-pupman-dot-com
• Subject: Re: Homemade Trasformer
• From: "Megavolt Nick" <tesla-at-fieldfamily.prontoserve.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sat, 19 Feb 2000 12:38:03 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi Ross,
             14^2 inches is the cross sectional area of the effective
magnetic circuit at its narrowest point.  Which equates to about 30kVA -
bigger than most pole pigs.  I really wonder if you've done the calcs right
as a 14^2 inch core is very big - it would weigh in excess of 50kG bare (add
on another 30kG for copper and .... ohhhh damn there go a few vertabrae)
If you posted the calcs that would help us understand what you are doing.

Regards
Nick Field



----- Original Message -----
From: Tesla List <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, February 19, 2000 2:22 AM
Subject: Re: Homemade Trasformer


> Original Poster: "ross andrews" <sflourine-at-home-dot-com>
>
>
>
> Hi all,
>
> One more thing -- my calculations came up with 14^2 for core size- why
> isn't it cubic inches?  I wasn't planning on a 2D tranny :P  What am I
> missing??
>
> Thanks again,
>
> Ross
>
>
>

• Prev: Re: RSG Sync
• Next: ideas......
• Index(es):
  • Main
  • Thread