Re: MMC Caps

• To: tesla-at-pupman-dot-com
• Subject: Re: MMC Caps
• From: "Rick Kirby" <rkirby-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sat, 19 Feb 2000 11:23:24 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Tesla List wrote:

> Original Poster: "Robin Copini" <rcopini-at-merlin-dot-net.au>
>
> Hi Daniel,
>
>  ME TOO!! - MMC FOR ME.  I don't know what the maximum power throughput
anyone
> has taken a MMC to, (excepting Terry's exps), but I run a pole pig TC and
> regularly belt my mmc with 10kva for 3 to 4 mins at a time and just yesterday
> went and checked the capacitance - hasn't budged off 0.09uf. I looked at
every
> other method of cap building and even went partially down the poly/flat plate
> road, took one look at Terry's and Reinhard's posts and said stuff it -
> built my
> entire mmc in one afternoon.
>
>  Even easier with Terry's new proggy for mmc's - GO FOR IT!!
>
> Regards
>
>  Robin in OZ.
> snip.........
>
............................................................................
......................................
>
>
>

Robin

I was thinking of using a MMC cap of that size on my Pig Powered coil.
Please describe your MMC, the caps used, number of strings, caps per string.
and any details about your coil especially the gap type and break rate.
How would you describe your discharges, purple or white hot, thin or thick,
and what length.


Very interested in North Carolina
Rick Kirby

• Prev: Re: bottle caps
• Next: Re: abreviations..too many for us newbies
• Index(es):
  • Main
  • Thread