[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

MO caps in primary?



Original poster: "Nathan Morris by way of Terry Fritz <twftesla-at-uswest-dot-net>" <themfam-at-home-dot-com>

Hello List,
I was looking at caps on
<http://www.usamfg-dot-net/webpage/usamfg/catalog.htm>http://www.usamfg-dot-net/webp
age/usamfg/catalog.htm and found some microwave oven caps made by Aerovox that
might be suitable for my design.  They are .25uF, rated at 2000V and cost .70
cents each.  I know MOTs are used for coiling but has anyone had any success
using MO caps in their TC primary?
TIA
--Green Horn