New Secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Esondrmn-at-aol-dot-com>

Well, I re-wound my 3.0" secondary this weekend.  I used # 28 wire again and 
used the same winding length of 13".  I finished it with some clear two part 
epoxy material that is sold for making clear counter tops.  Similar to Behr 
build 50, I believe.  I have to agree with all of you that have commented on 
this stuff.  It goes on thick with one coat and dries clear.  Looks very good 
and definitely thicker than 10 or 20 coats of polyurethane.  I do have lots 
of small air bubbles in the dried material that I could not get out, but I 
think it is ok.

Ed Sonderman