[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: MMC Capacitors, Spark Gap Phasing
Original poster: "william_b_noble by way of Terry Fritz <twftesla-at-uswest-dot-net>" <william_b_noble-at-email.msn-dot-com>
there are two ways to get the caps you need (well 3 actually):
1. buy retail in small quantity (most expensive)
2. band together and get larger quantities (but still small to the company)
3. find them surplus
if you are patient, you can find what you need surplus - for example, I had
0.22 uf at 1250V caps that seemed to work pretty well - I was selling them
for $20 per 100, but I've sold out and I haven't stumbled on another deal
like I got on those caps. You will find them at swap meets, or better yet
at a factory that is discontinuing some kind of equipment that uses the
caps - of couse you take what you can find, but you will get a low price.
Right now, I'd look to places that make switching power supplies and UPSs as
a source for such caps, maybe you will be lucky. The problem is, you need
to find the stuff directly rather than through a dealer, everyone who
touches them marks the item up a bit. basically, you trade your money for
your time
Bill
www.home.labridge-dot-com/~wnoble
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, December 10, 2000 2:24 PM
Subject: Re: MMC Capacitors, Spark Gap Phasing
> Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<FutureT-at-aol-dot-com>
>
> In a message dated 12/10/00 2:43:19 PM Eastern Standard Time,
> tesla-at-pupman-dot-com writes:
>
> > I am new to this list, but am determined to begin construction (with my
> > son's help) on my first coil in the New Year. After much research I
have
> > decided to use the "MMC" style capacitor bank. I am wondering if anyone
> > else has bulk quantities available (this was prompted by a previous
> > poster who indicated he had sold out). I can get them through an
> > electronics wholesaler but they still seem high at 1.40 Canadian
snip-------------------->