Re: Winding Primaries (fwd)

["Tesla list" <tesla-at-xxxxxxxxxx>]

Original poster: Tesla List Moderator <mod1-at-poodle.pupman-dot-com>



---------- Forwarded message ----------
Date: Sat, 02 Dec 2000 19:23:20 -0600
From: Barton B. Anderson <tesla123-at-pacbell-dot-net>
To: Tesla list <tesla-at-pupman-dot-com>
Subject: Re: Winding Primaries (fwd)

Hi Siman, All,

Here's a photo of my primary. I've been raving zip ties for a quilte a while because it's so
simple and quick and turns at pretty good. Drill through holes through runners, then simply pull
ties up through hole - over primary - and back down same hole locking on the bottom. Here's the
photo:

 http://www.classictesla-dot-com/photos/gizmos/12129801.html

Bart

Tesla list wrote:

> Original poster: Tesla List Moderator <mod1-at-poodle.pupman-dot-com>
>
> ---------- Forwarded message ----------
> Date: Wed, 6 Dec 2000 12:55:35 -0500
> From: sundog <sundog-at-timeship-dot-net>
> To: 'Tesla list' <tesla-at-pupman-dot-com>
> Subject: RE: Winding Primaries (fwd)
>
> Hi Simon, All,
>
>   I know some on the list will cringe, but I used zipties and 1/4"
> polycarbonate for my primary.  A pic of it can be seen at
>
> http://sundog.timeship-dot-net/images/big-primary.JPG
>

snip