[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Winding Primaries (fwd)



Original poster: Tesla List Moderator <mod1-at-poodle.pupman-dot-com>



---------- Forwarded message ----------
Date: Wed, 06 Dec 2000 14:53:38 -0500
From: Metlicka Marc <mystuffs-at-orwell-dot-net>
To: Tesla list <tesla-at-pupman-dot-com>
Subject: Re: Winding Primaries (fwd)

hi simon,
you could always cut the former down the length at the center line of
the holes, then place the tubing into the bottom half holes and put the
top half back on. you could drill small holes down between the tubes and
push plastic "swizzle" sticks or plastic dowel rods in to them for a
nice tight pin.
just a thought.
marc