[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: winding the primary?



oops, here's that link...   http://www.fwpd-dot-net/dona/tesla/primary.htm
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, August 31, 2000 6:40 PM
Subject: Re: winding the primary?


> Original poster: "acmnovak" <acmnovak-at-msn-dot-com>
>
> MIKE-
>  For the *perfect* primary see the link below. Many people use this method
> but never bother to describe it in detail. There's not much to it, but it
> requires a band saw and a drill press. I don't have either of those tools
> (yet) so I'm going to make my primary coil at school. A rotozip (spiral
saw)
> in a router table with a hand drill might work alright, but it's best not
to
> improvise too much. Good luck.
>
>     -Michael
>
>
> ----- Original Message -----
> From: Tesla list <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Wednesday, August 30, 2000 11:36 PM
> Subject: winding the primary?
>
>
> > Original poster: "homie" <ff-at-hotmail-dot-com>
> >
> > hi all,
> >
> > i am winding my primary and it is really starting to hack me off! i am
> using
> > 1/4in od copper tube. it is a pancake coil that is 9 turns and it wont
> stay
> > in place does anyknow "the KEY" to getting a perfet primary? i have seen
> > some real nice ones and i just cant see how. some say just work
> > slowly...well that dount seem to work i haev spent more time on the
> primary
> > then i spent winding the secondary.
> >
> > also i am looking for a varic ya i have seen them for sale but ya know
$$
> is
> > always a issue and they are likr 160 dollers does that seem right? does
> > anyone know how i can optian one for cheaper or is this as cheap as they
> > come?
> >
> > thanks alot,
> >
> > MIKE
> >
> >
> >
> >
>
>
>
>
>