Re: am I a SRSG failure?

["Luc" <ludev-at-videotron.ca> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Hi John,

What you said is it good only for 4 flat 1800rpm motor or is it good for 2 flat
3600rpm motor too?

Luc Benard(Montreal)


Tesla list wrote:
I don't use the "width of the dead poles" to modify my motors.

> I go by proportion; If the armature is 3 3/8" diameter, the flats
> should prpobably be about 1 1/8" wide, in other words the
> flat width should be 1/3" the diameter of armature or so, but
> it's not really too critical.
>
> I would not say that you are a SRSG failure.... optimism,
> persistance, and learning, is the name of the game here    :)
>
> Cheers,
> John Freau