Re: vacuum tube tesla coils

• To: tesla-at-pupman-dot-com
• Subject: Re: vacuum tube tesla coils
• From: "Bert Hickman" <bert.hickman-at-aquila-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sat, 22 Apr 2000 07:46:35 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Tesla List wrote:
> 
> Original Poster: "Norman Hockler" <norsan-at-bright-dot-net>
> 
>  From a previous posting ....if anyone is interested. Norm
> 
> For those interested in tube TC's I have some Eimac YC-156 tubes.  This
> tube is a ceraminc high mu triode and are pulls from MRI machines and are
> tested and have full output.
> 
> The tube is rated at 5000 watt plate dissipation.
> 
> Max plate voltage 6500 V
> Plate current 1A .  Plate current in pulsed service up to 64 amps
> Filament  voltage  is 15 V -at- 15 A.
> 
> The tube does not need a socket.  The tube is made to sit in a clear hole
> with the grid ring bolted to the chassis.  Filament connections are via
> 8-32 screws.
> 
> I have the Eimac spec sheets and I can send you a jpeg of the tube if your
> interested.
> 
> Tube is 9" high and 5" in diameter.
> 
> Contact me direct.
> 
> Norm
> 
<SNIP>

Norm,

Please send information. How much per tube?

Thanks in advance!

-- Bert --
-- 
Bert Hickman
Stoneridge Engineering
http://www.teslamania-dot-com

• Prev: Re: Godly Coil of Might
• Next: Re: Snapshots in time of a MWO process
• Index(es):
  • Main
  • Thread