[Prev][Next][Index][Thread]

Re: I have information you might want



Hi Brent,
    I would be very much interested.

Barry


----- Original Message -----
From: Tesla List <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, September 25, 1999 12:07 PM
Subject: Re: I have information you might want


> Original Poster: Brent L Caldwell <stretchmonster-at-juno-dot-com>
>
> Barry, Terry, Bert, and everyone else interested:
>
> Anyone interested in:
>
> "USING MAGNETIC PULSE SHAPING TO REDUCE SPARK GAP LOSSES AND
ELECTRODE
> EROSION" . . .
>
> then please read this post.
>
> I was out of College for two months and off the list (that is,
> travelling the country like a spoiled brat while all the rest of you
> still had to go to work everyday . . . heheheh).  It has been
brought to
> my attention that an article titled "Using Magnetic Pulse Shaping to
> Reduce Spark Gap Losses and Electrode Erosion" was discussed on the
list
> during that time.
>
> Bert says that this paper contains information relavent to spark gap
> losses due to electrical noise, and erosion of electrodes, and might
be
> of interest to coilers.
>
> It was also brought to my attention that there is another follower
> article to this one, and that a few of you were interested in
reading it,
> and that you need someone at Texas Tech University to find the
article
> (i.e. Me).
>
> Anyway, I know most of the co-authors of that paper, and just happen
to
> live walking distance from the Pulsed Power Laboratory, where this
paper
> originated.  I will show this request around and see if it can be
> located, if anyone on the list still expresses an interest.
>
>
> Brent