Re: ohio scientific induction heater

• To: tesla-at-pupman-dot-com
• Subject: Re: ohio scientific induction heater
• From: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 22 Sep 1999 18:55:45 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

to: Bill

We used a vacuum tube style 30 kw induction heater with a coil a few years
ago.  It didn't work very good --- it seems the impedance was wrong and we
couldn't get a good power transfer efficiency.

Regards,

Dr. Resonance


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Wednesday, September 22, 1999 4:07 AM
Subject: Re: ohio scientific induction heater


>Original Poster: "Bill the arcstarter" <arcstarter-at-hotmail-dot-com>
>
>"rrrr" <rrrr-at-lisco-dot-net> wrote:
>>I have a very old 10 kw induction heater
>>runs at 1mhz has any one ever used any thing like this for a primary
>>circuit ?????
>
>I'd like to hear more about what you have.
>
>I would think this woumd make an EXCELLENT primary power supply.  Of course
>you'd have to set up your sec to resonate at 1MHz, which I think you will
>find will be very difficult.
>
>Is your induction heater the spark gap style or other?
>
>-Bill
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail-dot-com
>
>

• Prev: That aluminum wire stuff
• Next: Re: winding my own transformer
• Index(es):
  • Main
  • Thread