Re: Dual RSG idea WAS: Re: Twin coil idea

• To: tesla-at-pupman-dot-com
• Subject: Re: Dual RSG idea WAS: Re: Twin coil idea
• From: FutureT-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 20 Sep 1999 12:53:00 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

In a message dated 99-09-17 07:54:06 EDT, you write:

<< (maybe a threaded rod and a clamp
> nut, etc) which is attached to two control motors (DC). You can
> now control the phasing of both RSGs separately with the touch
> of a button. You could even add limit switches (4 needed) that
> would automatically reverse the DC motors, once you have reached
> the maximum phase change possible. That way you can "cycle"
> through the phase. With such a setup you should be able to get
> rid of all phasing problems and (as you can control both RSGs
> independently) be of help in adjusting twin coils for maximum
> spark length. This just might be what Lou is (was?) looking for.
 
> Coiler greets from Germany,
> Reinhard
  >>

Reinhard,

In Lou's system, the phases have to be correct RF-wise, if the  phases
(firings) are "overlapped".  No mechanical gap system seems to be precise
enough to do this.  Lou's sync gaps both had adjustable phase capability.

John Freau

• Prev: Re: Aluminum magnet wire?
• Next: Re: Extra coil and (magnifier characteristics)
• Index(es):
  • Main
  • Thread