Re: Arc gap without transformer(120v)input

• To: tesla-at-pupman-dot-com
• Subject: Re: Arc gap without transformer(120v)input
• From: "Malcolm Watts" <MALCOLM-at-directorate.wnp.ac.nz> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Mon, 22 Mar 1999 18:49:30 -0700
• Approved: twf-at-verinet-dot-com

Hi Harvey,
             How about providing us with a circuit diagram (ASCII art 
is fine as long as you use the "return" key in the right places)?

Malcolm

> Original Poster: "Harvey Norris" <tesla4-at-excite-dot-com> 
> 
> I discovered a unique way to make a coil, or rather two of them,
> vibrate between series and
> parallel resonances. A load can be placed in the circuit at this point
> between what I have described
> as unobvious potentials.The currents across this load come from opposite
> directions and form a unity
> so that  an approximately dead short condition with little resistance in
> the load will avail itself of twice
> the amperage contained in  either end of the loads connections. Sound
> impossible? Not when each of 
> these currents are themselves alternating 180 degrees out of phase and
> share the same path in opposite
> directions. Begins to sound something like a conjugate phase reflection.
> Each of the currents in a parallel
> resonant circuit are 180 degrees out of phase: I have simply reconfigured
> the circuit so that each of these
> pathways can be used by both in opposite directions of travel. I have named
> this circuit the BINARY
> RESONANT SYSTEM
<snip>

• Prev: Re: flyback transformers
• Next: Re: Capacitor Container Failure -Reply
• Index(es):
  • Main
  • Thread