[Fwd: first coil]

• To: tesla-at-pupman-dot-com
• Subject: [Fwd: first coil]
• From: "mike.shaw" <mike.shaw-at-the-spa-dot-com> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Tue, 16 Mar 1999 11:55:08 -0700
• Approved: twf-at-verinet-dot-com

X-Mozilla-Status2: 00000000
Message-ID: <36ED7C75.AD744BEE-at-the-spa-dot-com>
Date: Mon, 15 Mar 1999 16:32:37 -0500
From: "mike.shaw" <mike.shaw-at-the-spa-dot-com>
X-Mailer: Mozilla 4.5 [en] (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
To: tesla-at-pupman-dot-com
Subject: first coil
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

   Hello,

I am in the process of building my first coil with the following specs:

secondary: 4 inch pvc with 900 turns of 24 awg wire.
primary: 15 turns of 3/8 copper tubing
input xfmr: 12 kv 30 ma

I plan on starting with salt water caps and would like advice on the
best configuration to achieve capacitance close to 066 mfd.  I am also
not quite sure how big to make the torrid for my top load.  Any advice
would be greatly appreciated.

Thanks,

Mike

• Prev: Re: Doorknob caps...
• Next: Re: Two Papers
• Index(es):
  • Main
  • Thread