Re: Autoformer? I hardly knew 'er! HA

To: tesla-at-pupman-dot-com
Subject: Re: Autoformer? I hardly knew 'er! HA
From: Terry Fritz <twftesla-at-uswest-dot-net>
Date: Thu, 24 Jun 1999 17:20:56 -0600
Approved: twftesla-at-uswest-dot-net
Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme
In-Reply-To: <19990623142729.53662.qmail-at-hotmail-dot-com>

Hi Christopher,

	I once heard somewhere that someone's coil did blow up due to trapped
solvents inside their enclosed secondary.  I imagine that was quite an
"e-vent"...  I would make a little vent hole in a low electrical stress
area to let fresh air purge the flammable gasses...

	Terry



At 10:27 AM 6/23/99 -0400, you wrote:
snip...
>
>Also I just capped my 6" secondary with pvc endcaps and pvc glue. Will the 
>glue vapor be a problem? It's air tight now and I'm wondering if the 
>outgassing from the glue will leave an explosive atmosphere inside the tube? 
>If not, where does it go?
>
>
>The Coronaphile
>Christopher A. Boden
>The Geek Group
>344 Ionia SW
>Grand Rapids MI
>49503
>(616)-574-8061
>
>The Geek Shall Inherit the Earth!