Re: The forever ongoing upgrade

On Sun, 06 Jun 1999 22:18:10 -0600 Tesla List <tesla-at-pupman-dot-com> writes:
>Original Poster: Bert Hickman <bert.hickman-at-aquila-dot-com> 
>Tesla List wrote:
>> Original Poster: Sebrf-at-aol-dot-com
>> Hi all:
>>         Since our revamped Tesla coil is up and running, it's going 
>back to
>> the high school for more demo's.  My son's science teacher is 
>becoming a fan.
>>         While the coil is out of the house, I'm going to build a new
>> secondary.  I have some 4" PVC pipe and 1/2 pound of 22 gage wire.  
>What I
>> can't decide is weather to build a 16" or a 20" coil.  And do I have 
>> wire for the task?  Any comments would be appreciated.
>> Rich Sebzda
>> Your friendly neighborhood catscan repairman.
>Unfortunately, 1/2 pound of #22 AWG will only be enough to make a
>winding a little over 6" long if you use schedule 40 PVC. You'll need 
>least 1.75 pounds (buy 2 pounds) of wire to wind a 20" long winding,
>which is the length I'd recommend). A 16" coil would be too short.
>-- Bert --

I use a 16" winding on 4" schedule 40, and feeding it 12000V 60ma have
gotten sparks nearly 30" long, with no secondary breakdown or ever even
one strike to the primary. There are no divisions with the coil, to block
an internal strike, but this has never happened. Am I just really lucky,
and my coil is a disaster waiting to happen?

Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno-dot-com/dynoget/tagj.