Re: Primary support -update

• To: tesla-at-pupman-dot-com
• Subject: Re: Primary support -update
• From: "ROBERT CRESSLER" <59CREROB-at-menasha-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 23 Jul 1999 10:17:29 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

snip
You can also go to the supermarket and buy cutting boards. Of course, then
you'll have to cut it into strips, which is kind of a pain with PE, because
it melts and sticks to the saw blade.

snip
        jim,all
      PE will cut  like a dream w/o melting if the blade is coarse. say
something like a 8 or 10 tooth (total teeth not per inch!) carbide tip
circular saw blade.
blades that cut acrylic and related materials will cause you trouble(ie
melting)
if used on PE.
i can supply tool geometry for sawing ,drilling,milling and the like if needed.

robert

• Prev: RE: Primary support -update
• Next: Re: Sync 200BPS improvement, (long post !)
• Index(es):
  • Main
  • Thread