Re: coil questions

• To: tesla-at-pupman-dot-com
• Subject: Re: coil questions
• From: bob golding <yubba-at-clara-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 22 Jul 1999 16:39:19 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

At 11:24 21/07/99 -0600, you wrote:
>Original Poster: Stan <sdarling-at-columbus.rr-dot-com> 
>
>Hello all. My coil is basically physically completed.  But I can't get
>any output off the toroid. Here are my specs:
>
>12/60 NST
>.01 ish uF cap (see below)
>16 turns 1/4" Cu tubing, .4" center-to-center spacing
>4" diam thin wall PVC pipe w/ 16" of 22g wire
>toroid approx 18" across made from 4" dia aluminum ducting
>spark gap is two adjustable bolts (I know, I know, it's just for now!)
>all interconnects are with 6 gauge wire


Hi Stan.
	What are you using for a RF ground?

cheers 
bob golding

• Prev: Re: Primary support -update
• Next: Re: Auzzie coilers
• Index(es):
  • Main
  • Thread