Re: Inductance Calculations for iron core

• To: tesla-at-pupman-dot-com
• Subject: Re: Inductance Calculations for iron core
• From: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sun, 18 Jul 1999 10:16:59 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

to: Ed

We gap each side 120 mils with Nomex and then clamp very tight with a
stainless steel band --- no air gap necessary.

Regards,

Dr.Resonance


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Saturday, July 17, 1999 7:29 PM
Subject: Re: Inductance Calculations for iron core


>Original Poster: Ed Phillips <evp-at-pacbell-dot-net>
>
>"to: Mike
>
>We run 4" x 1 5/8" cores, Hypersil C silicon, 130 turns of #10 AWG for
>up to
>12 kVA.
>
>Regards,
>
>Dr.Resonance"
>
> What air gap?
>
>Ed
>
>

• Prev: Re: dielectric material
• Next: Microsim PSpice 8 Evaluation Version
• Index(es):
  • Main
  • Thread