Re: Sonotube loss corrections

• To: tesla-at-pupman-dot-com
• Subject: Re: Sonotube loss corrections
• From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Tue, 12 Jan 1999 18:59:13 -0700
• Approved: twf-at-verinet-dot-com

to: Ed

I usually use the red, but the clear is probably available from G.E. Supply
at tel. 800-243-7877.

DR.RESONANCE-at-next-wave-dot-net


----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Re: Sonotube loss corrections
> Date: Monday, January 11, 1999 10:02 PM
> 
> Original Poster: Ed Phillips <evp-at-pacbell-dot-net> 
> 
> "After heating as Eddie suggested, then apply 3 coats of
> G.E. Glyptal to both inside and outside of the coilform before winding. 
> Allow 12 hours to dry between each coat."
> 
> 	Sounds like you are using clear glyptal.  Any idea where I could get a
> few ounces?  Seems to me I've asked this before, but only found source
> for red glyptal.
> 
> Ed
> 

• Prev: Re: Current limiting
• Next: Re: Tesla Records.
• Index(es):
  • Main
  • Thread