[Prev][Next][Index][Thread]
Re: New Design
to: Kenny
With that low driving potential (only 3 kV rms) you might want to consider
either winding with #28 AWG or attempting to find a 9 kV NST as a power
source.
DR.RESONANCE-at-next-wave-dot-net
----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: New Design
> Date: Saturday, January 09, 1999 2:09 PM
>
> Original Poster: PEARYII-at-aol-dot-com
>
> Kenny here again. Thank you all for the research you've supplied me
with.
> With that new info, ive created A new design for my TC. Here are the
specs Ive
> put together so far. Again, if you have an ideas or see any design flaws
in
> this new TC, feel free to tell me.
>
> Primary
> 8 AWG
> Inside Dia: 6 in
> spacing: 2 in
> Total Turns: 10
> Secondary
> Dia: 3 in
> Height: 9
> 24 AWG
> xformer
> Out: 3000 v 85mA
> Input: 110 v 60 hz
> Caps:
> 6 Bottle and Aluminum
> Capacitance: to be tested. What would be ideal range?
> Top
> Toroid
> Outside Dia. 6.25 in
> inside dia. 2.4375
> height: 2.25
> Spark Gap
> I used an idea I saw on the internet, which hopefully works. Its
basically
> two screws held up and pointing each other. I can change the distance,and
the
> current distance is 1/2 in.
>
>
>
>