Nested Secondaries

• To: tesla-at-pupman-dot-com
• Subject: Nested Secondaries
• From: Bunnykiller <bigfoo39-at-idt-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sun, 26 Dec 1999 11:17:15 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi All...


	I was thinking about something that I havent heard any ideas about (
maybe its too ludicrous). I searched the archives ans still nothing on
it, so heres the idea. 

The concept is nested secondaries, one inside the other. My plans would
consist of an 8 " dia tube with a 7" tube inside. Of course, both wound
with 22Ga wire and both with the same amount of wire. Seeing that the 8"
tube would hold more wire per length as the 7", the 8" form would have
to be space wound for several inches ( havent done the exact math yet).
Once both forms have been wound, the base of each secondary would be
connected to each other ( and to RF grnd) while the upper leads would
both be connected to the top load. 

Ok  heres the speculation ...   would this design allow for more power
to be supplied to the top load ???  considering that we are dealing with
EMF would the extra coil system use that emf and not subtract it from
the outer coil ?

some of the possible down falls that I see would be arcing between the
secondaries BUT  ...   if they are the same ( electronically) why would
they arc to each other ?   and what about the EMF produced by the
secondaries themselves when the field collapses in them ?  ( not too
bright on this subject , but trying ;)   ) 


while im here    what is the avg. length of streamers produced by a
10KVA polepig ?  Im getting  5-6'   is there hope for more length ? 

and one more     is there anyone out there that lives in La, New Orleans
area ( or am I the only person in this city that loves coiling ;)  ) 


Scot D

• Prev: Re: Induction heating in toroid / short circuit of secondary
• Next: A Christmas Puzzle
• Index(es):
  • Main
  • Thread