Re: Unknown Rectifier

• To: tesla-at-pupman-dot-com
• Subject: Re: Unknown Rectifier
• From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 22 Dec 1999 11:40:18 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Almost certainly a 40 kV rectifier from Electronic Devices Inc
(http://www.edidiodes-dot-com/).. about 0.70 amps according to the web site..

----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Unknown Rectifier
> Date: Wednesday, December 22, 1999 10:02 AM
> 
> Original Poster: Brian H Le Page <b.h.le-page-at-surrey.ac.uk> 
> 
> 
> All
> 
> Yes it is another 'what is it?' post.  I came across some black prism
shaped
> components 6.5 inches long by 0.75 inches square.  The two terminals are
> about 0.5 inch in from each end on one long surface (one at each end). 
The
> writing says:
> 
> RVP 40
> EDI 7008
> 
> With the symbol for a diode beneath that.  They were made up into a
bridge.
> Any help appreciated.
> 
> Have a good Christmas break.
> 
> 
> Dr B.
> 
> Dr Brian H Le Page
> Composites Research Group
> School of Mechanical and Materials Engineering
> University of Surrey
> Guildford
> GU2 5XH
> 

• Prev: Re: Franceformer repair...... and misc info
• Next: Re: RSG question
• Index(es):
  • Main
  • Thread