Re: 12 volt primary circuit.

• To: tesla-at-pupman-dot-com
• Subject: Re: 12 volt primary circuit.
• From: Bunnykiller <bigfoo39-at-idt-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sun, 19 Dec 1999 17:16:00 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Tesla List wrote:
> 
> Original Poster: timp-at-clarityconnect-dot-com
> 
>         Has anyone built a coil with a low voltage, hi current
> primary circuit ?  Something like 12 volts/100 amps.  What I've
> read on most of the web pages is that power in = power out and
> that the high secondary voltage produced is a result of resonant rise.
>         I'd like to be able to haul the coil and batteries into
> a clear spot in the woods with a couple of ground rods in place.
> Out of sight with no AC power lines in sight either.
> 
> Another clueless newbie,
> Tim
> 
> 

if you could find a material that could withstand the temperatures that
would be developed in the primary and the cap and if the secondary was
wound properly    just maybe  but i dont think so

• Prev: RE: Induction heating in torroid / short circuit of secondary
• Next: NST resonance -at- 50Hz
• Index(es):
  • Main
  • Thread