Re: Sealing Plexiglas

• To: tesla-at-pupman-dot-com
• Subject: Re: Sealing Plexiglas
• From: Rick Kirby <rkirby-at-earthlink-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 10 Dec 1999 13:26:08 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Tesla List wrote:

> Original Poster: Ted Rosenberg <TRosen1-at-Tandy-dot-com>
>
> Robert: I think you probably wore out the Spell Check Dictionary. But it
> seems I have some testing to do. Perhaps plain, old, (really not too old)
> varnish? I'm guess here folks.
>
> Has anyone actually sealed a secondary on Plexiglas with a 'material' that
> worked? if so, what and where and how much (US$ please). My head is spinning
> more than the winding jig at this point.
>
> Ted
>
>

Ted

I used an acrylic form for my 6" coil after winding the coil. I sealed it with
two coats
of "Behr Build 50" a two part epoxy paint, each coat is as thick as 50 coats of
polyurethane paint. It is clear and you can buy it at "Home Depot" for about
$29.00.


Rick Kirby

• Prev: Re: Sealing Plexiglas
• Next: Re: MMC Cap source
• Index(es):
  • Main
  • Thread