Re: rf ground and coupling

• To: tesla-at-pupman-dot-com
• Subject: Re: rf ground and coupling
• From: Travis Tabbal <bigboss-at-xmission-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 20 Aug 1999 15:55:32 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

You don't. The primary should not be connected to the secondary at any
time. Not by direct electrical connection anyway. Just put the secondary
in the middle of the primary. The RF ground connects to the lower wire on
the secondary, and to the center terminal of any safety gaps, if you're
using 3-pole safety gaps.

Travis

Tesla List wrote:

> Original Poster: Brad Shelton <brad_shelton-at-yahoo-dot-com>
>
> How do youconnect the primary coil to the secondary and how doyou hook
> upthe rf ground.
>
> Brad
>
> reply to brad_shelton-at-yahoo-dot-com
>
> __________________________________________________
> Do You Yahoo!?
> Bid and sell for free at http://auctions.yahoo-dot-com

• Prev: Re: DC supplied to Tesl;a coil
• Next: Re: In-Line 3-Phase Variac
• Index(es):
  • Main
  • Thread