Re: Fiberprobe PCB bulk order

• To: tesla-at-pupman-dot-com
• Subject: Re: Fiberprobe PCB bulk order
• From: HomerLea-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 16 Aug 1999 11:50:56 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

I don't know if it is any good for this project, but I have LOTS of orange 
colored fiber optic cable with one thin fiber in it.
jim        homerlea-at-aol-dot-com

<<<< The real trick is getting connectors on the cable.  I us ST style
connectors (Bayonet) with ceramic ferrules.  These cost about $9 bucks each
and you need four.  It also takes considerable "stuff" to put these on the
cable)  Howver Digi-Key sells 10 meter dual cables with ceramic conectors
already installed for $37.42.  So, I would think the pre-made cables would
be the way to go. - Terry >>>>




> Subj:  Fiberprobe PCB bulk order
>  Date:    08/16/1999 1:45:18 AM Pacific Daylight Time
>  From:    tesla-at-pupman-dot-com (Tesla List)
>  To:  tesla-at-pupman-dot-com
>  
>  Original Poster: Finn Hammer <f-hammer-at-post5.tele.dk> 
>  
>  Guys!
>  
>  I am going to have some circuit bords for Terry`s fibre-optic probe
>  system made.

• Prev: First Light - update
• Next: Simulate!
• Index(es):
  • Main
  • Thread