Re: Laquer

• To: tesla-at-pupman-dot-com
• Subject: Re: Laquer
• From: "Dr. Resonance" <Dr.Resonance-at-next-wave-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sat, 14 Aug 1999 20:11:00 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

to: Joel

Yes, but sand them thoroughly inside and outside and then heat them with
heat lamps for 4-5 hours to drive off any remaining moisture.  PVC is very
hygroscopic and will combine with atmospheric moisture on the surface and
track RF HV like crazy.

Regards,

Dr.Resonance


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com <tesla-at-pupman-dot-com>
Date: Saturday, August 14, 1999 4:05 AM
Subject: Laquer


>Original Poster: "Joel Feenstra" <feenstrl-at-river.it.gvsu.edu>
>
>Is lacquer OK to use to seal the PVC pipe?
>TTFN
>
>Joel Feenstra
>
>"Oh you are so observant, are you some kind of detective?"-
>Stewy from The Family Guy
>
>

• Prev: Re: Danger, and I don't understand why.
• Next: Re: Capacitors
• Index(es):
  • Main
  • Thread