[Prev][Next][Index][Thread]

Re: Rotary Sync Gap



> Original Poster: Terry Fritz <terryf-at-verinet-dot-com>

>         I do have one question.  Is there a way to hook up a neon lamp, high
> brightness LED,  etc. to shine on the rotor to indicate were in the ac
> cycle the rotor is at.  In other words, I am trying to get the gap points
> to line up at the peak of the AC cycle.  There must be some simple device
> to do this.  I do have a nice inductive timing light that may be a
> possibility too.  With my voltage probe down I can't see the cap voltage
> directly.

If you have a CT on the sec base, compare its position
to the mains using your 2-channel scope.
-- 


-GL
www.lod-dot-org