[Prev][Next][Index][Thread]
Re: New fangled flexigap?
to: Will
Lots of beer and high voltages don't mix under any condition. Might as
well drive drunk and wonder why the train ran over you.
DR.RESONANCE-at-next-wave-dot-net
----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: RE: New fangled flexigap?
> Date: Friday, September 11, 1998 5:02 PM
>
> Original Poster: "Payne, Will E" <will.e.payne-at-lmco-dot-com>
>
>
> > Hey Will,
> > I think you are onto something new - the flexi-gap!
> >
> > I've not heard of this before...
> >
> > Good luck with the beers. Will you soon be trying out any other
> > hydrocarbon solvents?? :)
> >
> <snip>
>
> > Original Poster: "Payne, Will E" <will.e.payne-at-lmco-dot-com>
> >
> > Last night I glued 13 RQ electrodes on a strip of 1/8 in thick
> > glass-composite salvaged from a yard transformer. I spaced the gaps at
> > 0.008, and by bending the strip, I can get the gaps up to about 0.050
> > and still have them fairly uniform. I had several beers in me by the
> > time the glue was applied, plus irregular edges on my shims from the
> > tin snips kinda skewed my spacing a bit.
> >
> <snip>
>
> The tweaked spacing on the gaps measures 0.008 +/- 0.002 unflexed.
> I can flex the strip and get them out to 0.040 with +/- 0.005 with
> care.
> The trick to uniform expansion seems to be to torque the ends of the
>
> strip and compress it longitudinally, rather like an archer's bow,
> instead
> of pushing from beneath.
>
> Due to domestic issues, neither the beer nor the TC received much
> attention last night, but I shall return !!
>
> Will
>