Re: MOT saturation tests II

• To: tesla-at-pupman-dot-com
• Subject: Re: MOT saturation tests II
• From: Charles Brush <cfbrush-at-interport-dot-net> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Thu, 10 Sep 1998 22:08:11 -0600
• Approved: terryf-at-verinet-dot-com

>Bill,
>
>I haven't tried it, but I would guess that you would use a microwave oven
>transfromer as a current limiting inductor just as you would a welder.  Leave
>it intact, short the outputs and run the current to be limited through the
>primary - and the shunts should come into play.
>
>Ed Sonderman



Ed,

I used one to limit a potential transformer recently, and it worked quite
well powering a six inch "livingroom" coil.  OK, maybe it was a  little
big for my livingroom.  ;-)


Charles Brush

• Prev: Safety Thread, NST versus Pole Pigs
• Next: Re: win tesla vs. JHCTES
• Index(es):
  • Main
  • Thread