safety gap

• To: "'Tesla List'" <tesla-at-pupman-dot-com>
• Subject: safety gap
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Sat, 9 May 1998 21:31:26 -0500
• Approved: tesla-at-stic-dot-net

----------
From:  bob golding [SMTP:yubba-at-clara-dot-net]
Sent:  Saturday, May 09, 1998 9:39 PM
To:  tesla-at-pupman-dot-com
Subject:  safety gap

>Date: Sat, 09 May 1998 19:36:19 -0700
>To: tesla-2-at-emachine-dot-com
>From: bob golding <yubba-at-clara-dot-net>
>Subject: safety gap
>Cc: t2
>
>hi all
> can someone give me a ballpark figure for setting my safety spark gap. I
am using gene waldo's basic design (three bolts spaced 120 degrees apart)
but I am using a 2" ring. I'm not sure if I will have enough clearance. Max
is about 3/4".  I am using a 9kv 50mA neon, 23 awg 4.25"x21" secondary, 10
turns 3/8" cu primary, 0.0177uf flat plate cap, 2.4mh air core chokes, 1k
50watt series resistors 8"x4" toroid for now. many thanks for all the help
so far.
>
>bob golding lightning without rain
>
>bob yubba-at-clara-dot-net

• Prev: ST123 Tranformer
• Next: X-ray tube spec sheets on my page...
• Index(es):
  • Main
  • Thread