[Prev][Next][Index][Thread]
Choke Design? (was: RE:Continued Problems (fwd)) (fwd)
---------- Forwarded message ----------
Date: Mon, 4 May 1998 13:31:00 -0700
From: "Basura, Brian" <brian.basura-at-unistudios-dot-com>
To: "'gweaver-at-earthlink-dot-net'" <gweaver-at-earthlink-dot-net>,
"'tesla-at-pupman-dot-com'" <tesla-at-pupman-dot-com>
Subject: Choke Design? (was: RE:Continued Problems (fwd))
Gary,
I'd be interested to here the details of your choke design.
Thanks,
Brian B
> ----------
> From: Tesla List[SMTP:tesla-at-pupman-dot-com]
> Sent: Saturday, May 02, 1998 12:36 PM
> To: tesla-at-pupman-dot-com
> Subject: Re: Continued Problems (fwd)
>
>
>
> ---------- Forwarded message ----------
> Date: Fri, 1 May 1998 19:34:50 -0700 (PDT)
> From: gweaver <gweaver-at-earthlink-dot-net>
> To: Tesla List <tesla-at-pupman-dot-com>
> Subject: Re: Continued Problems (fwd)
>
> At 12:39 PM 4/29/98 -0600, you wrote:
> >
> >
> >---------- Forwarded message ----------
> >Date: Wed, 29 Apr 1998 12:52:12 EDT
> >From: Esondrmn <Esondrmn-at-aol-dot-com>
> >To: tesla-at-pupman-dot-com
> >Subject: Continued Problems
> >
> <Big Snip>
>
> I found something that worked. I
> then removed the safety gaps completely and rely entirely on the chokes.
> I
> have a choke design that works very well. I get white hot 76" discharge
> sparks from my 6" TC on 3200 watts. I tried series resistors on the neons
> and later removed them too. I blew 7 neons in the learning process. I
> don't have a rotor but I get excellent output with my variable speed RQ
> vacuum spark gap, 8 gaps .25" each. I used a Lincoln arc welder as
> current
> limiting on my 18KW transformer.
>
> Gary Weaver
>
>
>