Internal connecting of rolled caps

• To: "'Tesla List'" <tesla-at-pupman-dot-com>
• Subject: Internal connecting of rolled caps
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Fri, 20 Mar 1998 23:02:45 -0600
• Approved: tesla-at-stic-dot-net

----------
From:  FutureT [SMTP:FutureT-at-aol-dot-com]
Sent:  Friday, March 20, 1998 8:07 AM
To:  tesla-at-pupman-dot-com
Subject:  Re: Internal connecting of rolled caps


This double translation is GREAT !!!!
John Freau

<< snip
> And, that post converted BACK into english by Altavista:
 
> Humor is good. I wonder what would happen if it was done again. :) Note:
> I did not alter this output, or the input in any way. Chip, I am not
> sure your message would get across correctly to German readers.
 
 ----
 
> I experimented with role protective caps the same way, which you
> describe. The two problems, which must overcome you, manufacture a
> relationship of the smooth, low profile within the role, and can, to
>throughout roll the condenser. 
>  >>snipped to avoid overburdening list>

• Prev: opened pulse cap
• Next: 30 BPS, 60 BPS tests
• Index(es):
  • Main
  • Thread