How to rise the secondary?

From:  djQuecke [SMTP:djQuecke-at-worldnet.att-dot-net]
Sent:  Friday, June 26, 1998 2:27 PM
To:  Tesla List
Subject:  Re: How to rise the secondary?

I mounted a PVC cap, mouth up on center of platform using nylon bolts and
place the sec in that.  You would need the type PVC cap that is flat rather
than rounded.  The sec fits snuggly in this cap and can readily be adjusted.
This gives me approx 1 1/4" of vertical travel for tuning.


-----Original Message-----
From: Tesla List <tesla-at-pupman-dot-com>
To: 'Tesla List' <tesla-at-pupman-dot-com>
Date: Monday, June 22, 1998 8:53 PM
Subject: How to rise the secondary?

>From:  Marco Denicolai [SMTP:marco-at-vistacom.fi]
>Sent:  Monday, June 22, 1998 12:46 AM
>To:  tesla-at-pupman-dot-com
>Subject:  How to rise the secondary?
>A construction problem to me is how to build the secondary (or the primary)
>so that one of them can be lifted in respect to the other to set up the
>coupling. Can anybody suggest a good solution?
> Marco Denicolai                   Vista Communication Instruments, Inc.
> Hardware Development Manager      www.vistacom.fi
> marco-at-vistacom.fi                 Kaisaniemenkatu 13 A
> fax:    +358-9-622-5610           SF-00100 HELSINKI
> phone:  +358-9-622-623-15         Finland
>   Remember, Murphy was an optimist! I am not...