[Prev][Next][Index][Thread]
Which DC Drive?
----------
From: Greg Leyh [SMTP:lod-at-pacbell-dot-net]
Sent: Monday, June 15, 1998 6:28 AM
To: Tesla List
Subject: Re: FW: Which DC Drive?
Steve Young wrote:
> Suppose I knocked out the MOT magnetic shunts, or had some other "hard" DC
> supply. Again, what are guidelines for sizing a current-limiting charging
> reactor?
The reactor L should be sized so that, at the maximum break rate,
it will just barely finish charging the cap bank between firings.
In other words, BPS(max)/2 = 1/[2pi * SQRT(Lreact/Cpri)].
--
-GL
www.lod-dot-org