Help with a 30 kV primary (fwd)

---------- Forwarded message ----------
Date: Tue, 28 Jul 1998 15:52:44 EDT
From: ESchulz531-at-aol-dot-com
To: tesla-at-pupman-dot-com
Subject: Help with a 30 kV primary

	I am using a 30kv 300ma transformer and a 20 NF 100kv cap.  
I was wandering if anybody on this mailing list has used this kind 
of primary voltage and could give me some advice on it.  Besides 
not using it :) Example primary spacing for 10 turns of 3/8" copper 
tubing.  I went threw the archives and didn't find very much.  If all 
the responses are of a type "don't" I will just stick to using 24 kV 
and increase the primary break rate.


Another day another 10' foot arc...
Erik Schulz