[Prev][Next][Index][Thread]

Re: How to rise the secondary? (fwd)





---------- Forwarded message ----------
Date: Sat, 18 Jul 1998 06:03:08 +0000
From: "John H. Couture" <couturejh-at-worldnet.att-dot-net>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: How to rise the secondary? (fwd)


  Richard -

  How did you measure the frequency with and without streamers. Do you have
any data on frequencies and streamer capacitances?  

  John Couture

---------------------------------------------------

At 09:51 AM 7/17/98 -0600, you wrote:
>
>
>---------- Forwarded message ----------
>Date: Fri, 17 Jul 1998 01:56:41 -0400
>From: Richard Hull <rhull-at-richmond.infi-dot-net>
>To: Tesla List <tesla-at-pupman-dot-com>
>Subject: Re: How to rise the secondary? (fwd)
>
~~~~~~~~~~~~~~~~~~~~  big snip

>Rob is absolutely correct here and I have just such tests shown on one or
two of our
>old video report tapes.  A piece of #24 wire 6 feet long attached to a
resonator will
>really swing resonance on down the scale!  An flaming white hot arc is a
much larger
>ionic surface conductor than such a piece of wire.  Again, the old hands-on
folks have
>"been there....done that".  One need not be a rocket scientist to figure
this out real
>quick if observant around bigger running systems.
>
>Richard Hull, TCBOR
>
>
>