Re: RSG materials

To: tesla-at-pupman-dot-com
Subject: Re: RSG materials
From: Michael Tucknott <Michael.Tucknott-at-virgin-dot-net> (by way of Terry Fritz <twf-at-verinet-dot-com>)
Date: Sun, 27 Dec 1998 08:35:45 -0700
Approved: twf-at-verinet-dot-com

Hi all sorry to re send the mail but my ISP keeps going west and I`m
not sure if all my mail is being sent.


> I am collecting bit for a RSG for our(Dr B)and myself new coil (9"
> sec+pole pig)etc.
> 
> I have a source of Tufnell(between 1/4" and 1/2" thick)would this be OK
> for the
> rotor disk??????????
> 
> And I can get hold of stainless steel bolts or rod.
> Would stainless steel electrodes be a good material to use(flying
> electrodes)and
> what dia of electrodes is a good sized and is there any particular shape
> which
> would work best IE flat end or rounded or a combination of the two???
> I plan to mount the stationary electrodies in blocks of Brass with a
> base of
> Tufnell.
> 
> Cheers Mike Tucknott(moving up to the big league)
> 
> ---------------------------------------------------------------------
> "He tames the thundering bolt of jove and annihilates time and space"
> Nikola Tesla 1906
> ---------------------------------------------------------------------